IOS Recovery via XMODEM / ws-c2960G-48L

Cisco IOS Recovery via XMODEM / ws-c2960G-48TC-L
ICND2 - CCNA Preparations

When refurbishsing 2010 Cisco Catalyst WS-C2960G with new IOS and fan, after reload i get memory allocation error and stayed in Switch rommon.

Access:

- via console Serial-to-RJ45 only

- just few commands working

- image corrupted on flash:

Switch :

sudo apt-get install lrzsz screen

sudo screen /dev/ttyUSB0 9600

dir

dir flash:

set

set BAUD 115200

Ctrl+C

sudo screen /dev/ttyUSB0 115200

copy xmodem: flash:c2960-lanbasek9-mz.122-55.SE10.bin

Ctrl + A

:

exec !! sx /cesta_k_bin-file/c2960-lanbasek9-mz.122-55.SE10.bin

...and IOS image was there OK ;)

So i enabled routing with commands below:
sdm prefer lanbase-routing
ip routing

and L3 switch is working good