Op-Com ver. 1.99 has a cheaper PIC chip 18F45K8 which is not possible to flash with a better firmware. It has though correct date 2007-12-10 and ver 5 printed on the back of the board. But still "fake". It works though - but only partially. Cannot read any live data and also cannot access SWCAN bus modules.
Op-Com ver. 1.95 has a proper PIC chip 18F458 - possible to flash with the latest original firmware ver. 1.67 (2024). It works with Fantomel releases of OpCom software. Correct driver must be used. Possible to read live data and when running ADV also programming possible of some modules.Still doesn't read SWCAN though. Relay is working good - can hear the click sound. But then it shows only Connecting to ECU...
Need to activate the board computer to show actual consumption, battery voltage level etc.
So now waiting for opcom rev. D+ 2024 from "i-diag.by" - which should be good and working all can buses. The guy have already sent me software, drivers and licenses so I can try to install.Installed without issues. HQ clone still works.
Will need to update drivers for the D+ later on... Still it will come in approx 4 weeks.
No comments:
Post a Comment
Thank you for your comment. Will try to react as soon as possible.
Regards,
Networ King